Ask Experts Questions for FREE Help !
Ask
    jimkilgarriff's Avatar
    jimkilgarriff Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 3, 2014, 03:09 PM
    Furnace problem.
    I have a lennox m/n g61mpv-60c-110-10 hvac system in my house,I have an auto standby generator, sometimes during an electricity outage the furnace will cut out and has to be manually reset.has annyone any solution to this problem.

    Jim.

Check out some similar questions!

Furnace problem [ 1 Answers ]

I recently had a Goodman furnace installed in my garage, when it fires up and is Running it makes a beeping sound. What could cause this

Problem with my furnace [ 1 Answers ]

What does pressure switch open with inducer on mean?

Having problem with my furnace [ 1 Answers ]

I have a Goodman Gas Furnace and the light blinks 3 times and says the pressure switch stuck open. What do I need to do?

Stat problem or furnace problem? [ 1 Answers ]

Need help. Not sure if having problem with stat or furnace. Stat was programmed to 68, and on "Auto", but furnace kept running past 79 and non-stop. I turned off the stat but it still heated up till the circuit was shut off. I left it off for at least an hour then clicked it back on. This solved...

Furnace problem [ 1 Answers ]

I have an Amada 90 gas furnace with a dual stage Aprilaire 6202/6203 control panel, and an Aprilaire thermostat. When I turn on the thermastat for heat, the furnace turns on, the fan starts, the thermocoupler glows, and the burners light. Within about 10 seconds, it all shuts down, and begins the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.