Ask Experts Questions for FREE Help !
Ask
    clineka's Avatar
    clineka Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 1, 2014, 10:12 PM
    Kenmore elite washer
    I have an elite top loader there is no power its not the wall plug do these washers have a fuse or reset button
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 3, 2014, 05:00 AM
    What stops it from doing anything are the water valves and the water level switch. Power comes in at the water level switch (Sometimes through the lid switch first.), then the water level switch sends power to the water valves until the diaphragm on the water level switch gets pressure through hose from bottom of tub and then switches power to the timer to start the motor to agitate or spin. Here are some manuals: https://dl.dropboxusercontent.com/u/...ng_Machine.pdf
    https://dl.dropboxusercontent.com/u/...c%20washer.pdf
    https://dl.dropboxusercontent.com/u/...%20washers.zip
    I do not have a wiring diagram for that specific machine, but almost all top loaders made by Whirlpool are the same. You will need a meter, but first take off hoses and check the screens. If they are stopped up, nothing will work. You can then test the water valves and the solenoids and the water level switch by removing the hose and blowing in it while testing the switch with an ohm meter (Unplug first).
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Washer coding/kenmore elite washer? [ 0 Answers ]

Please could you please show me the coded for a kenmore elite what does ace code mean please show me on the computer

Kenmore Elite Washer [ 0 Answers ]

When my washer is in the spin cycle it has began making a noise. I thought it was because there were too many clothes which was causing it to become off balance. That is not the problem because it happens when there is only one piece of clothing. I pushed down the seal to discover shavings of...

Kenmore elite washer [ 1 Answers ]

There's a ld and ob error on my washer, and water is leaking on the top back part, and through the plastic just beneath the tub,it is not draining on the proper place and water also coming out on the hot tube... what does that means and what will I do

Kenmore Elite Washer [ 1 Answers ]

My washer is adding water during the entire spin cycle, earlier in the day it was stopping in the middle of a cycle, and shutting down?:(

View more questions Search