Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tie into Existing 4" sewer line
[ 16 Answers ]
Hello, I am going to be installing a new sewage ejector pump, and will tie into the main house 4" sewer line with a 4x4x2 Y connection. My question is, what is the best way to connect that. I know how to tie into it, but is it easy? It seems like the 4" line will not have too much give in it,...
Installing a cleanout in an iron pipe sewer line
[ 3 Answers ]
OK; read all the posts and exposed my 4" iron pipe sewer line as close to the house as I can get- about 3 ft. Ready to cut the pipe and install a combination wye and 1/8 bend but first two questions: 1. Is it really worth all the trouble to double the wye to provide access to the portion of the...
Laundry Waste Line--Can you tie into sewer mainline cleanout?
[ 18 Answers ]
At some point in my single-story home's existence, a previous owner moved the laundry from its indoor setup (the original design) to the garage. That owner tied the laundry waste line into the cleanout for the kitchen sink, which was exposed in the garage. He used 1-1/2" steel pipe for the...
Plugging hole in main sewer line/installing cleanout?
[ 2 Answers ]
My basement sewer backs up every so often from a hole the previous owner drilled in the cast iron pipe which they used as a drain for the washer and a wash basin. The hole is 2-3 inch in diameter and is not sealed in anyway. To me this seems stupid and probably the cause of the sewer backups... View more questions Search
|