Ask Experts Questions for FREE Help !
Ask
    sheets16's Avatar
    sheets16 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 25, 2014, 04:19 PM
    Kenmore Elite Smartheat Quietpak9 stopped heating after Service
    Sears was out to do a yearly cleaning and now our dryer doesn't have heat. Easy fix or should I wait 3 weeks for them to come fix it?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 26, 2014, 08:03 AM
    They did not clean it properly and most likely you now have a blown safety. You have to take it totally apart and wash out all parts except the motor to get it clean. Sears will not do that. You also need to replace the belt and grease all bearings with white lithium grease. You will also need a good digital meter to find the safety that is bad. Here are some manuals: https://dl.dropboxusercontent.com/u/...l%20Dryers.zip
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite smartheat quietpak9 he5 [ 0 Answers ]

Dryer won't start but timer works

Kenmore elite smartheat quiet pak 9 manual? [ 6 Answers ]

I took the lint trap apart to clean it there were two wires attached from dryer to lint trap they fell inside the dryer I am unable to reach them easily are they important? What r they used for? Everything seems to be working all right

How to take the panels off a kenmore elite smartheat quietpak9 dryer? [ 2 Answers ]

I have a Kenmore Elite Smartheat Quietpak9 dryer. I need to replace the door switch. How do I take the panels off?

My Kenmore Elite gas dryer stopped heating up [ 0 Answers ]

The flame does not come on. I thoroughly cleaned the vent, hose and all other lint areas.Drum turns fine. I checked other settings and still nothing. This unit is about 6 years old. I had someone push the on button while I watched to see any flame come on and there was nothing. Is it time to get...

Kenmore elite smartheat quietpak9 [ 1 Answers ]

My Kenmore dryer turns itself off after less than 5 minutes of run time. It doesn't matter which cycle I have selected, I have tried unplugging it and then plugging it back in after waiting as much as an hour. Nothing seems to help. Any ideas?

View more questions Search