 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I don't know if this will help, but here are some manuals: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
https://dl.dropboxusercontent.com/u/...set_Codes.docx https://dl.dropboxusercontent.com/u/...ishwashers.zip It is my guess that some safety is tripped if resetting it will not work. You could have a stopped up drain or a float stuck in the "up" position. Sometimes the door micro-switch gets out of adjustment and you have to adjust it so that the switch closes when the door is closed and locked. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I recently purchased a new Kenmore Elite 417.8110 front load dryer. Since day one I have gotten the CE error. I have had a service man out to check my dryer, a new dryer has been brought to my house. The exhaust pipe going out of the house has been cleaned (from the ground and the roof, which is...
Won't spin out
My Kenmore Elite 665 dishwasher (model #15914001) is showing error code "_ J" throughout most of the cycle. Does anyone know what this means? It also leaves a lot of dirty dishes (especially in the top rack), but I'm not sure if that's related.
My dishwasher is corroded with dish detergent... I have put vinegar in bowls on the bottom of the dishwasher and this has helped but the dishwasher still has a thick layer of dish soap that needs to be removed so the dishes aren't covered. I have also raised the water temp. to 140 degrees which...
View more questions Search
|
