Ask Experts Questions for FREE Help !
Ask
    laduet's Avatar
    laduet Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2014, 08:00 AM
    Is a nuetral wire required in a sub-feed panel installation?
    Installing a 100A/3P 480V feeder from one building to another and question whether a neutral wire is required to be pulled?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 7, 2014, 11:22 AM
    If you need the answer to this question, at 480VAC, you shouldn't be doing the work. Sorry but doing wrong with 480 will kill you fast. 480 delta or 480y are different.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wire gauge feed 200amp panel [ 8 Answers ]

What is the typical wire gauge used to feed a 200amp residential panel?

Wire size required from 200 amp main to 100 amp sub panel [ 1 Answers ]

The sub panel is located @75 feet from main panel.

Required wire for sub-panel, 400 ft, underground, 100 Amp, 120 Volt [ 5 Answers ]

Hello, I recently purchased a property which currently has electrical service running into a solitary shed. 400 feet away from the shed is an old foundation I would like to build a cottage on. I'm trying to figure out what it may cost me to run power underground from the shed to the proposed...

Adding a nuetral bus to an old main panel [ 5 Answers ]

Greetings... Can I add a neutral bus to my houses main panel... I have one bus in there now that is for both nuetral and ground... when I go to hookup the neutral from my 220 gfci breaker to that bus I keep tripping the breaker... the spa is a 3 wire 2 hots and a ground... the instructions say to...

Sub panel feed wire gauge [ 1 Answers ]

I am adding a sub panel to a new garage addition. New 125 amp panel with a double 50 amp breaker in the existing panel. The new sub panel will be 75 feet from the existing main panel. My concern is the correct wire gauge because of the length of the run. The cable will be inside underfloor then in...

View more questions Search