 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dishwasher Model 665.1374.
Kenmore dishwasher Model 665.1374.
The panel will not light up and dishwasher sometimes makes what sounds like a draining noise when the start button is pushed. What I have done: I tested the door switches; there are two. I tested this for continuity across the leads of each switch. When the switch was closed it had continuity and when open no continuity. Next, tested thermal switch, again for continuity. So I figured it was the circuit board. The new board did not fix it. |
||||
|
||||
|
I would think that you have a bad connection somewhere. That's the most common reason for a failure. Here are some manuals: https://dl.dropboxusercontent.com/u/...ishwashers.zip
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My "Lock On" light will not go out and the machine won't start. I have tried holding the "No Heat Dr" but as the manual suggests for four seconds and longer repeatedly to no avail. I Have also take the cover off the electronic module and check all wire for being secure. I have killed power and...
While still under warranty my dishwaher quit working (the panel had no function) The serviceman determined that the panel had become defective due, possibly to leaked moisture. When he returned several weeks later, he replaced the panel and things were fine. Four months and literally 3 uses...
Smart cycle buton light blinks. No other wash option buttons work including start. The cancel button does turn off the blinking.
My touch pad is working strange. It is stuck in pots and pans. I can get it to wash but many times have to keep pressing the start button. I've tried the reset technique I have heard on this board but nothing happens. It does seem to be washing okay and draining and it heats. When it does...
View more questions Search
|
