Ask Experts Questions for FREE Help !
Ask
    mcmillandustin's Avatar
    mcmillandustin Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 1, 2014, 04:57 PM
    Minimum conductor size for commercial cooking appliance
    A 240 volt, single-phase, 21.85 kw commercial cooking appliance is to be supplied by TW copper branch circuit conductors. What is the minimum size of this conductor permitted?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jul 1, 2014, 06:49 PM
    Based on your other posts, these appear to be homework questions.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Jul 2, 2014, 01:13 PM
    Get a copy of the NEC and start looking up the answers. Everything, or at least 2/3, are in the code book.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Equip Grounding Conductor Size [ 0 Answers ]

I have a 200A breaker box that used to be a Main and became a Sub panel when an oudoor box was installed ahead of it to "feed-thru" and provide an outside means of disconnect, at the insistence of the Power Company. I have recently learned that this arrangement is not code-compliant since all of...

Aluminum conductor size for service. [ 10 Answers ]

I am installing a new service on my residence and I am installing a pole mount meter equipment box with CT metering equipment. It will have an ampacity of 400 amps and will feed both my home and garage. The service at the house is 120/240 volts and is a 200 amp panel. The run in question is 200...

Range wiring - breaker and conductor size [ 4 Answers ]

This weekend I will be wiring a 120/240v 8,800 watt range (oven with 4 burners on top). My questions concern wire and breaker size. I've asked about this before and I still cannot determine the best answer. I understand that under the NEC, the minimum sized circuit for a range is 40 amp, using...

What kind of flex gas line to use on cooking appliance [ 5 Answers ]

I am referring to an application at a high school snack bar , moveable (for cleaning only), The line existing is metal flex w/yellow plastic coating. Is there a code , or industry standard , that would require this spific type of gas flex line? Thanks, Tim

Service conductor wire size [ 1 Answers ]

I am wiring a two-unit apartment that previously had fuse boxes for services. I am installing a two meter box outside to supply separate 200-amp rated main circuit breaker panels, one for each apartment. The calculated load for one apartment is about 102 amps, the other about 132 amps. What minimum...

View more questions Search