 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I recently replaced my hot water heater, basically same capacity, etc. as the previous heater. I am noticing a drop in water pressure in the entire house, guess would be 20-25%. The only change is I used a dielectric union between the new heater and copper pipe. I have to assume the water heater...
I have the same problem with hot water pressure loss. 50 gal gas power vent ( american hwt ). The only thing different is the dielectric unions. The nipples on the tank do have a blue plastic lining on both sides. Also, I have 1/4 turn ball valves on both hot and cold sides of the tank, which is...
Hello everyone, I have a question involving my plumbing. I was having terrible water pressure and I checked the pressure at the pump itself and it was great. Went to the pressure tank and it was trickling. Shut down power to pump and drained system - checked air pressure and it was not...
Pump kicks on at approximately 30PSI and shuts off at approximately 53PSI. The problem noted is there is a loss of pressure, not a significant loss, but a noticeable loss. The loss of pressure/power is most noticeable when my lawn sprinkler system is on. Great appreciate your help. Thank you!
After the installation of a new hot water tank, we have less pressure which is only noticeable when trying to fill the tub. Any ideas? Thank you.
View more questions Search
|
