Ask Experts Questions for FREE Help !
Ask
    bcantu1983's Avatar
    bcantu1983 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 30, 2014, 06:35 AM
    Central Air vaporator/Air handler
    My condenser unit oustside works but I get no air flow inside. When selecting the fan only switch(thermostat) for the air handler/evaporator to turn on all I hear is a clicking noise. My Central Air was working fine but then iced up due to low on frion. It has done this in the past but after defrosting the air handler/evaporator coils you can once again fell the air flow.

    What could be the reason my air handler/evaporator for not enagaging and spinning the fan blades?

    What are some trouble shooting steps I can do to seee what is wrong?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jun 30, 2014, 01:06 PM
    Look at the control panel on the air handler. Should show you a fault code or could be a bad motor or a bad capacitor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air conditioner r 410 new old r22 air handler and coils replaced [ 0 Answers ]

I have a new ac compressor R 410 but my air handler and coils are r 22 need replaced. I have talked to 3 companies that said I do not have to replace the compressor and one company that says I have to change the compressor.

Air handler won't run, just an unusual hum from the air handler. [ 0 Answers ]

My sister in law tried to install a new thermostat and has somehow messed something up. I went over and her Trane air handler will not run. I found that the glass bus fuse beside the transformer was blown. I replaced the fuse and I still get nothing except the hum from the transformer. I...

Central air cond air handler doesn't come on but compressor does. [ 98 Answers ]

If I don't turn the central air on in the morning, when the attic is cooler, the air handler won't come on but the compressor outside fires up. At night when the attic cools down, the air handler will work. I have replaced the T-Stat but that didn't help. Today, I put the fan on first, and it...

Air handler works fine but compressor will not shut off. Air is cold. [ 1 Answers ]

I noticed the floor was very cold at the airhandler closet. A coils are clean in airhandler and I replaced the filter.My outside compressor just keeps running without stopping.Airhandler seems to be cycling on and off like it should.

Central Air, Handler Fan will not turn without a helping push [ 6 Answers ]

I have a Lennox, 10 year old central air unit in my condo. The Air Handler Fan is not turning on as it's supposed to. I opened the unit and gave the fan a spin, and then it worked fine but still will not start on its own. I put the fan on manual and just letting it run, and that's keeping the...

View more questions Search