Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New Double Pole Breaker 20 Amp GFCI tripping
[ 7 Answers ]
I took out a 20 Amp double pole non-GFCI breaker that was attached to pool pump wiring. I know that this needs to be a GFCI breaker. I purchased a new 20 Amp double pole GFCI breaker. I installed the double pole GFCI breaker 20 Amp to panel where the old non-GFCI breaker was attached. The wires...
30 Amp Double Pole Breaker is hot and tripping
[ 10 Answers ]
Hi, I just got a Maytag Neptune Dryer a week ago. I have it plugged in to our old dryer outlet (which was replaced less than a year ago) which is 3 prong. The dryer voltage is 240 volts and I am running it on a 30 amp double pole breaker. The problem is, this is new electrical wiring and a...
How to change a 20 amp single pole to a ge 45 amp circuit breaker one pole?
[ 5 Answers ]
I have a 20 amp service in my garage and I want to plug in my camper. The camper has an inverter that says it is rated for 45 amps. I changed the breaker to a 30 amp but it keeps popping the GFI outlet. How do I convert this amperage to meet the needs of the camper?
600 amp service with a 200 amp single pole breaker
[ 0 Answers ]
I have a 600 amp GE service closet in my basement that feeds 7 other socket meters and each have there own breaker. Question is I just added a brands new 200 amp panel and new line service to a area I just converted to storefront space for a deli. So I can't find a 200 amp breaker for that closet...
Tripping 15 amp breaker
[ 3 Answers ]
Hello I have currently replaced my kitchens existing "Flourescent Tube Lights" (like the ones you find in a utility room, the long tube bulbs) with 4 reccessed lights (70 watt bulbs each) I disconnected the tube lights and used the existing wire to connect to the 1st reccessed light, then wired... View more questions Search
|