 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Look at these: https://dl.dropboxusercontent.com/u/...der_Washer.pdf
https://dl.dropboxusercontent.com/u/...uft_Washer.pdf https://dl.dropboxusercontent.com/u/...ice_Manual.pdf https://dl.dropboxusercontent.com/u/...erTraining.pdf https://dl.dropboxusercontent.com/u/...on-svc-man.pdf https://dl.dropboxusercontent.com/u/...TWN_Washer.pdf https://dl.dropboxusercontent.com/u/...e%20Manual.pdf Maytag, which use many of the same motors: https://dl.dropboxusercontent.com/u/...%20Washers.zip These are all the manuals I have on GE. Good luck, and use a meter. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an old GE motor that I would like to use at 115 volts. This motor is currently wired for 220 volts. The cover plate has the diagram listing the information but is unreadable. The current wiring configuration is as follows: Tied together are (2,3) (6,7) (5,9) and (8,10) Leads 1 and 4 are...
I need to install spark plug wires on 1987 V6 3.8L Buick Electra.I need to see a digram of Which plug wire from spark plug goes to correct order on coil.thanx,Don
I am replacing a 2 speed condenser motor which had 4 wires - black, purple, brown and red. Black was wired to L1, red to L2, purple and brown to cap. The cap terminal that the purple was on, also has a black wire attached coming from some type of controller. The new motor has 5 wires - black,...
Hello! I have a GE explosion-proof motor #5KC35PN96X TEC NV, class A, 1/4hp, 1725, 115/230, 4.2/2.1, 60c ph1, fr4, CW/CCW. The wiring diagram( sticker on housing) is too faded to read. This motor is still available new but no website I have tried has any info on schematics. It has 8, 18ga...
View more questions Search
|
