Check out some similar questions!
15A Battery fuse burning out
[ 1 Answers ]
Have 2009 Ultra Classic wich keeps burning the battery fuse. Checked wiring and nothing obvious found. Battery was working fine, but could it be shorting out? Just washed it yesterday but it should be electrically dry by now. Can anybody help or do I have to tow it to the dealer?
Too much load on a 15A circuit?
[ 3 Answers ]
I live in a townhouse and one circuit is particular flips on a regular basis. Has on it: -garage door opener -2 separate single bulb fixtures in the garage on a switch -1 outlet in the garage -a 3-bulb fixture in the kitchen on a switch -a 2-bulb fixture in the bathroom on a switch -a...
15a breaker 12 gauge wire
[ 5 Answers ]
Hey folks, I have a, hopefully, easy question for y'all. I recently moved into a new house (a foreclosure) that has some wiring issues. I've got the big ones fixed, but I've been stymied by one small circuit in my kitchen. There are 6 outlets (and, I think, something else I can't yet...
15A vs. 20A on #12 Romex
[ 10 Answers ]
We are running #12 Romex wire for circuits from the panel. I want some of the breakers in the panel to be 15amp and some to be 20amp. My electrician says that they should all be 20amo because #12 Romex is code for 20 amps. I said sure but it shouldn't matter is we go smaller than code (i.e....
15A off a 20A junction
[ 2 Answers ]
Is it OK to take a single 15A line off a 20A branch circuit. Specifically, I have a new 20A kitchen wall circuit which will exist only of two 20A counter GFCI outlets. I have had to rework that wall for the gas stove and want to run a 15A outlet for the gas stove electrics. Can I just take a 15A... View more questions Search
Add your answer here.
|