Ask Experts Questions for FREE Help !
Ask
    landlorddennis1's Avatar
    landlorddennis1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2014, 07:25 AM
    John deere 314 mower with hydrostat bangs into forward gear and will not back up at a
    John deere 314 mower with hydrostat bangs into forward gear and will not back up at all, why?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 6, 2014, 04:31 PM
    Hi,
    It would seem that you have wear in the control linkage that does not allow the hydro to engage properly in forward and is beyond the operating range of reverse(which is at best only half the speed of forward. Link to JDParts is:
    John Deere - Parts Catalog
    Just enter 314 and hit Find to get the 312 and 314.
    Picture attached.
    Peace,
    Clarke
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

JOHN DEERE 185 hydrostat drive belt replacement [ 0 Answers ]

I am in the process of replacing the hydro-static drive belt on my 185 Hydro. I am to the point of; Do I take the electric clutch off? Or what else is needed to get the belt on? Getting around the clutch problem or tips to finish the job.

Grinding in forward gear john deere lawn tractor 116 [ 2 Answers ]

I obtained a john deere lawn tractor 116, used, it grinds when you put it in forward gears, when u left off the clutch. Any ideas? What type of transmission and oil to use on john deere lawn tractor 116

Changing Hydrostat fluid in a John Deere L120 [ 1 Answers ]

I have a John Deere 12. Its about 3 years old. I believe the hydrostat is starting to go bad. Tractor no longer will climb steep grades. Also when I first start going forward, you hear a load mowning sound. Tracto alsop seems slowe than when new I know the K46 is a sealed unit that you are never...

John deere 314 [ 5 Answers ]

When I try to engage my deck the tractor starts to die. When I click the deck off it runs without problems what's up?

View more questions Search