 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trouble with a Rheem power vent water heater model number 43vp505f2
I have a Rheem power vent water heater that seems to have an issue... I have no hot water. The blue light at the bottom blinks 8 times pauses blinks once and the pauses... I have everything shut off right now but would like to know what the flashing light means.
|
||||
|
||||
|
Your answer is on page 37: You have a problem with the FV-Flammable Vapor sensor. It could be dirty or you are storing gasoline or flammable paint thinner, etc. near the water heater. See: https://dl.dropboxusercontent.com/u/...al_AP15761.pdf
You may have to clean it or replace this sensor. Dust can cause the problem. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi. I have a Rheem Power Vent hot water heater, model PVW50-36FV, that won't turn on. The far right and left LED lights indicate the FV sensor detected the presence of flammable vapors. The unit is shut down and in lockout mode. How do I unlock this baby? Checked the sensor and it's within normal...
Where can I locate a service manual for rheem power vent hot water heater?
I need to replace a 15 year old Rheem Power Vent water heater that is leaking. I plan on replacing it with a new Rheem water heater. I think I can do this myself. In looking at my old unit, it appears that the power vent is just an add-on motor and vent on top of the water heater. My old vent...
I have a Rheem Power Vent hot water heater, model 21VP40-1. My problem is that it will not stay lit on the final start up stage. It operates OK, stays lit, if turned on manualy on the unit. I have replaced the gas valve. I am leaning toward the control module. Any advice?
View more questions Search
|
