Check out some similar questions!
"No heat" on York m/n P3CUD model furnace. Need help.
[ 0 Answers ]
Cust complained about no heat. Arrived at residence and immediately found bad spiral type HSI that was cracked-replaced with Sil-Nitride type. Also suspected old W/R 50E/47-070 Ignition control-replaced with universal control. Cleaned & checked burners, flame sensor(flame sense reading @...
Can somebody help me troubleshoot my york furnace? I have no heat.
[ 1 Answers ]
In a cal for heat, the induction motor starts up and immediately shuts down, then the blower turns on an won't shut off. I turn off the t-stat and I still won't shut down until I turn off the breaker. The led flashes 12 times but the fault code label doesn't have 12 on it.
Heat pump on York furnace
[ 3 Answers ]
If we run the fan continually will that make the heat pump not run? Also, how cold does it have to be before the heat pump won't run, it's -5 right now.
York furnace no heat
[ 1 Answers ]
My York 800c affinity gas furnace is not coming on it's 6 months old. I lived in San Antonio. I have program thermostat I set for heat and nothing happen. I hear click on but no heat I wait for hour still no heat. Now my thermostat say temporary what does that mean? I check in attic and gas value...
York furnace - No ignition,no heat
[ 4 Answers ]
I have a York Gas Furnace (model# P2MPD14W08001B, 12yrs old) giving out no heat. I did basic troubleshooting and realised system was not igniting; replaced ignitor (changed original 4-5 years ago) - fired up initially and then went out after running for about 30 minutes. I cleaned the flame sensor... View more questions Search
Add your answer here.
|