Check out some similar questions!
Power Craft Generator
[ 3 Answers ]
I purchased a Powercraft 800 watt generator in Dec. 2012. I used it once and it performed perfectly. Yesterday I reqired the use of it but it refused to start. I get no spark from the high-tension lead. I have checked the on/off switch and all wiring connections. I contacted the service agent as...
Taco 571 zone valve stays open w/ no t-stat wires connected until term 1 wire is discon
[ 13 Answers ]
I have 3-zone heating (w/ Taco 571 zone valves installed near the output of the gas furnace), and 3 times in the last 4 years the second zone (main floor) all of a sudden stays open and heat never shuts off to this one particular zone. The other 2 zones always work fine. I disconnect the...
15.5hp B&S won't start
[ 1 Answers ]
I have a 48" Bobcat with a 15.5hp Briggs. It worked flawless for 4 years and now won't start up on the second pull like it has always done. I have to choke it and pull the cord, then release the choke and pull about 10 more times before it starts up. Gas actually drips out of the muffler when it... View more questions Search
Add your answer here.
|