Ask Experts Questions for FREE Help !
Ask
    LilPup's Avatar
    LilPup Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 4, 2014, 03:30 PM
    Nothing works
    I dropped a necklace that landed on the prongs of a plug that was plugged into a powe
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    May 4, 2014, 04:35 PM
    Want to say a little more?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    May 4, 2014, 05:41 PM
    Quote Originally Posted by LilPup View Post
    I dropped a necklace that landed on the prongs of a plug that was plugged into a powe
    OK.
    How can we help?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snow blower won't throw snow impeller works auger works new belt pushes up the chute [ 11 Answers ]

The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Can I, and how, move files from MS Works 3.5 to Works 9. [ 3 Answers ]

How can I move my spreadsheet files from MS Works 3.5 to Works 9?

Remote works, light works, fan humms does not turn [ 2 Answers ]

Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...

Ms works database to ms works spreadsheet [ 2 Answers ]

Have tried copy/paste but I get a message stating "make sure the destination area is as large as the info you wish to paste" .Anyone help please?

View more questions Search