Ask Experts Questions for FREE Help !
Ask
    JAS411's Avatar
    JAS411 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2007, 09:18 AM
    902 t surface mounted shower
    I have recently moved into a George Wimpy home which is 3 yrs old at first my shower would not stop dripping so I had to tighten it with force it was also stiff to open & close.. then I could not turn it off at all so I had to turn off at the mains. I managed to get to where the washer is but how do I get the washer off. That said is the fault with the washer?
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #2

    Apr 5, 2007, 08:52 PM
    Kissler & Co., Inc.
    Show me the faucet
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Apr 6, 2007, 07:28 AM
    Quote Originally Posted by doug238
    Kissler & Co., Inc.
    show me the faucet
    Doug, Here's a picture of a Showerforce SF 902T Thermostatic Mixer Surface Mounted Shower valve. The manufacture has said that this valve's no longer available. I don't know about the availability of repair parts. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wall Mounted Toilet- General Questions [ 5 Answers ]

Howdy all, I'm on a roll today with the questions... The baseboard of my bathroom started deteriorating under my wall mounted toilet (hangs off the wall- nothing touching the ground). I assume the wax ring is ka-put. I need to replace it. I have a special wax ring made for wall hung...

Surface crack in new Vikrell shower wall [ 1 Answers ]

I just bought and installed a new replacement (4-piece) Sterling shower unit with Vikrell walls. A slight surface dimple/indentation (5 mm in diameter) was discovered on one of the walls after installation was complete. The crack has not gone all the way through the shower wall. How can I...

Changing from a wall hung toilet to a floor mounted one. [ 2 Answers ]

My house was built in 1962 and has Case model 3000 wall hung toilets. I am remodeling one bathroom and have to change the plumbing over from wall hung to floor mount. The problem I have is that the current closet flange is mounted to a T with one side going to the sewer and the other going to the...

Installation of Wall-mounted Rear-discharge Toilets [ 2 Answers ]

Hi Folks, I'm looking at either the 1) Geberit pressure-assist wall-mounted toilet or 2) Porcher Kimera wall-mounted toilet. In either case, I would use a horizontal discharge configuration. 1) QUESTION: Does the Kimera support a horizontal discharge configuration? If so, does it travel...

Wood fence mounted on concrete wall [ 4 Answers ]

Howdy all. I want to put up a wood fence, mounted on top of an existing poured concrete wall that's about 2' tall. My question is about how to connect the wooden posts to the concrete securely. I was thinking of drilling into the concrete, setting maybe 3/4" threaded bolts (using bolt-setting...

View more questions Search