Ask Experts Questions for FREE Help !
Ask
    daytonazen's Avatar
    daytonazen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 30, 2014, 12:05 PM
    How to reset Honeywell digitql programmable Thermostat
    help! I have a digital, programmable Honeywell thermostat. I would like the a/c to run constantly, at the set temp. It runs 2x a day for about 10 minutes. Is
    there a way to just reset all info. To original default settings? Thank you so much, its hot in Florida!
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Apr 30, 2014, 12:06 PM
    Pull the batteries out for a few minutes... then put them back in.. that should reset everything back to defaults.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #3

    Apr 30, 2014, 07:45 PM
    Depending upon the model of the thermostat, removal of the batteries may or may not restore the factory defaults. Here's a place to start: Honeywell | Thermostat | Air Cleaners | Humidifier | Ventilation | Water System | Home Security | Gas Detector | Honeywell Thermostats
    Once there, roll over the "support" button for a drop down listing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I reset noma programmable thermostat 52-2570-6 [ 0 Answers ]

We would like to program the thermostat so that the temperature is the same for all seven days of the week 21.5 degrees starting at 6 AM and 17 degrees C starting at 10 PM Please help

Honeywell programmable thermostat [ 10 Answers ]

Thermostat will not shut down furnace when switched to "off" position, but will shut down when set temperature is met.

How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced [ 2 Answers ]

Just a quick question.

Honeywell programmable thermostat [ 1 Answers ]

My thermostat's display is showing - AC and the heat will not come on, I removed it and replaced the batteries to no avail? What can I do to get the heat to work again? It is 40 degree's here

View more questions Search