 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Elite series #20992991 Leak and Spin problems
Can anyone tell me why my machine leaks from the bottom during the beginning of the wash cycle. Also, its not spinning all the water out of the clothes during the spin cycle and the clothes are being wrapped around the agitator?
|
||||
Check out some similar questions!
Can anyone tell me how to get the TOP off this machine? So far I've tried to pry if off with no success. There aren't any "clips" that I can see... but I can see two screws that are impossible to get to. I have to replace a Bleach Hose that was cut in half by the drum... But I sure can't see how...
The tub on my kenmore elite HE3 will not spin for the wash, rinse or spin cycles. The motor is making the usual sounds like it's supposed to but the tub just does not budge.
I have a Kenmore Elite Top Loading Washer, Model 110.24952300. When the washer goes to the spin cycle, it does not spin in the first spin cycle. It does this in the slow spin cycle that precedes the main spin cycle. When it cycles to the regular spin cycle, it does spin properly. I found that...
I been having problems with my Kenmore washer elite model 110.16962502, it is not spinning at the rinse and spin cycles. It agitates but it will not do the spin. If I play a little bit with the drum (spinning it manually) and opening and closing the lids it will then start spinning. Any ideas on...
My washer spins but does not get clothes dry in most cycles. Sometimes we can respin and it works but most times it does not. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
