 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs Intek Governor Spring
What is the static setting of the governor spring at rest on a Briggs 6.5HP OHV Intek as depicted in the following diagram?: (part No.209) Should it be tight or slack?
Secondly, does the end of the governor lever( part No. 202) hook in the small hole or the bigger reinforced hole on the carburetor throttle plate? Thanks! https://www.askmehelpdesk.com/tools-power-equipment/intek-throttle-free-governor-carburetor-linkage-367909.html |
||||
Check out some similar questions!
Can anyone show me what the governor looks like on the engine and give me specific details on how to get it off I would like to make My Craftsman lawnmower go faster... if anyone could help me thanks
I just bought a used 22" 3N1 Yard King walk-behind lawn mower. The model sticker is missing, so I dont have a model number or year of manufacture. The engine is a B&S Intek 7.5 HP "Throttle-Free Design", model: 127602-0247-E1, code 04031-FB. Can you provide me with a diagram or a good...
I would like to exchange a 19 hp V Twin into a Craftsman lt 2000 mower. It was originally equipped with a 22 hp Intek V OHC. I am wondering how different the wiring is going to be. Also is this possible? The 19 HP twin is Model 42A777 Type 1236 01. The Intek is Model 407777 Type 0174 E1 Thank...
When I change carbs on my engine I had to change all the linkage including governor arm. Can someone tell me the proper procedure for adjusting the governor. If I turn it one way it runs wide open all the time, If I turn it the other way, the throttle will change speed, as I move throttle,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
