Ask Experts Questions for FREE Help !
Ask
    Nhesselt's Avatar
    Nhesselt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 14, 2014, 03:57 PM
    How do I wire a 1.5hp ge electric motor
    I have a 1.4hp electric GE Motor... 115/230V... 3450 RPM... 60 Hz... how do I wire in the cord?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Apr 14, 2014, 05:53 PM
    What voltage are you using? There is usually a wiring diagram on the plate where the wires connect to the motor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1phase. 3HP electric motor wire diagram [ 0 Answers ]

I have an Ajax 1phase 3HP electric motor with 10 wires #t1 to t10 can't find a wiring diagram for it. It also has what I thank is either a thermal potecter and a capacitor or 2 capacitos.

What size wire and breaker are needed for a 5Hp, 20Amp 230 V motor? [ 12 Answers ]

Hi, What size wire and breaker are needed for a 5Hp, 20Amp 230 V motor on an air compressor? Also, what is the best way to wire between the pressure switch and the panel box when the compressor will be 10-15 feet away? I am thinking a plug and a receptacle... Thanks Frank Please email...

5hp briggs and stratton tiller motor need model # or replacement motor [ 3 Answers ]

I have an earthquake tiller model 5020 with a 5hp briggs and stratton motor that I need to replace but I can not find the model of the motor. Does anyone know which motor replaces that motor or do you know the model number of the motor that was used on that tiller?

What size wire and breaker are needed for a 5Hp, 14Amp 220 V motor? [ 10 Answers ]

I have to run an outlet for a 5hp 14 amp 220 v motor. The motor will be about 10 feet from the panel, but by the time I have run up, over, and down, it is about 20 feet. What size wire and breaker should I use?

View more questions Search