 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to fix safety so it will disengage blades
I purchased a used Encore 36" belt drive walk behind mower - I just replaced the upper "operator presensce control handes so the blades would disengage when unattended - however the blades still do not disengage when handles are released - any ideas?? Could it be the switch?? Any other possibilities besides the switch?? Thanks for any help!!
|
||||
Check out some similar questions!
I have a 2003 LT2200 craftman mower. The blades will not disengae until I turn the mower off, Checked evrything I could lubed the pully worked back and forth still will not disengage until mower turns off. Anything I can do that would resolve this problem?
When I pull the p.t.o. Switch to disengage the magnetic clutch the blades will not stop turning, also the switch for operating the blades in reverse does not do anything when pushed
I have a Sears 16.5 HP LT. The blades stay engaged even after I disengage them with the engage/disengage handle. I have to turn the engine off to completely disengage them. When I start the mower again the blades are disengaged. Is there some type of adjustment for this ?
I have a MTD yard machine and the mower blades will engage but won't disengage. Any help on what could be wrong would be appreciated.
I have a Craftsman Mode# 917.256522 and the blades will not disengage. The lever will not travel completely to the disengage point and feels to bind. I cannot see where it is binding. Any ideas on how to fix this problems? Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
