 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
GE GFSS2kexa Ice Maker Problem
Suddenly, our ice maker has stopped functioning properly. It still makes and drops ice cubes but for some reason the bottom of the ice tray develops a thick layer of ice.This is turn causes all the loose cubes to freeze together in a large lump. Any suggestions on what he problem might be?
|
||||
|
||||
|
The problem is that either the solenoid is leaking water or you need to do a simple adjustment. The water level is controlled by the time the switch is depressed by the plastic cam as it rotates after dropping ice cubes. You take off the end cap and you will see an adjustment that has "+" and "-" and you turn a Phillips screw with a spring around it. Try 1/4 turn at the time until the problem stops. The water level can be changed by an increase or decrease in water pressure. Here are some manuals: https://dl.dropboxusercontent.com/u/...ile_Artica.pdf
https://dl.dropboxusercontent.com/u/...ide_refrig.pdf https://dl.dropboxusercontent.com/u/...e%20Manual.pdf (Ice-makers are made by about three companies for all brands) https://dl.dropboxusercontent.com/u/...e%20Manual.pdf https://dl.dropboxusercontent.com/u/...e%20Manual.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Recently, we had to replace the submersible pump in our well as we had little or no pressure. We have pressure back to the original level, but our ice machine is not producing ice. Any suggestions?
Our refrigerator is less than 2 years old and has had this problem since new. The ice maker functions fine except the ice cubes always seems to be melted into a hard ball together. The individual cubes are produced initially, but after a day or two they become cubes no longer. It's like they are...
Ice maker not making cubes my ge profile ice cube maker has stopped making ice
My ice maker stopped working. I replaced the valve and connected all the hoses and wires back up. Then I turned the ice maker on, and when it cycled and the water came on to fill the ice maker, the water came out of the water in the door dispenser. I checked the wires on the valve to make sure I...
View more questions Search
|
