How to install air filter on 18.5 hp briggs & stratton

japrt Posts: 1, Reputation: 1

New Member

Apr 1, 2014, 02:52 PM

How to install air filter on 18.5 hp briggs & stratton

I can not get the cover back on when replacing air filter on 18.5 hp Briggs and Stratton, it will not go in far enough to clip in.

Check out some similar questions!

Briggs & Stratton Single 18hp OHV is flooding [ 4 Answers ]

Found out that gas was getting into my crankcase and causing severe smoke and hard running. I removed the carb and replaced everything that came in the carb rebuild kit, and installed the carb back onto the engine. When I tried to start it, the battery had died so I put a charger on it and came...

Location of the points and condenser on a Briggs & Stratton 18hp. engine [ 1 Answers ]

On an old 18HP Briggs & Stratton engine, I want to remove a bad coil, points and condenser. Install a new Amateur Magneto because the parts have changed. Where will I find the points and condenser? Are they under the flywheel?

Install Link Choke of Briggs & Stratton Engine [ 10 Answers ]

The link choke of my Murray tractor engine is loose. I could not figure out how to put it back. Can someone help? A diagram will be super. The engine model is 28v707 type 1113e1. Thanks.

What does a flooded fuel filter look like on a briggs & stratton lawn tractor [ 3 Answers ]

Should a fuel filter for a briggs& stratton lawn tractorbe saturated in fuel

Briggs & stratton v-twin oil soaked air cleaner [ 1 Answers ]

I have a wood's riding mower with a Briggs 18 HP v-twin engine. After mowing 2-3 times the air cleaner is soaked with oil and the engine loses power. Rings have been replaced and all o-rings and gaskets. Has there been problems with air cleaners not allowing enough air into the engine. The...

View more questions Search

Check out some similar questions!

Add your answer here.