Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cold water shut off valve just spins
[ 2 Answers ]
My cold water shut off valve in the basement just turns perpetually when I try to shut it off. It shouldnttake many minutes of turningin order to shut off the water supply to the house right? Do I need a plumber?
Water shut off valve for toilet how to fix it
[ 6 Answers ]
I have sut the water off to the house and am attempting to install a new valve but for some reason the new valve doesn't look the same but it the right size I am not sure how to install it. I went to Lowe's with the old one and they sized it up buti guess my valve is older it has a brass ring in it...
Leaky cold water shut-off valve under bathroom sink
[ 1 Answers ]
I have a leaky shut-off valve and am leery about fixing on my own. Any specific advice about how to do this will be greatly appreciated.
No Shut Off Valve between water heater and bathroom sink valve
[ 14 Answers ]
I have a constant drip in my bathroom sink. After a little trouble shooting, I came to the conclusion that my hot water valve underneath the sink is the culprit. I traced the pipe down the wall, into the basement and to the water heater. The only thing between the water heater and the old valve in...
Leaking cold water shut-off valve.
[ 17 Answers ]
Hi Again! I got an answer previously from SpeedBall1 about repairing a leaking cold water shut-off valve (Thanks for your speedy response!). I forgot to mention that the valve is not brass or metal, it is CPVC. Do these type of valves have the bonnet packing in them? I took apart an old PVC... View more questions Search
|