Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding shower to half bath - supply line question
[ 3 Answers ]
Hi, I'm adding a shower to my existing half bath. I have a question about where to get my water. Option #1 - Supply both hot and cold from lines that supply the existing faucet. 1/2 inch copper feeds the faucet. I like this option, but I don't know about pressure considerations. I would tap...
Plumbing: Toilet supply line
[ 10 Answers ]
Hello, I purchased a universal toilet supply line to fix my leaking toilet water. It fit perfectly except that it was too long (my first attempt at fixing this issue). So I purchased a shorter on that isn't universal and doesn't come with extra 'fittings'. My issue now is that I don't know...
How to increase pressure in supply line after addition of tee in line(05
[ 2 Answers ]
I added an outdoor frostfree water valve to the cold water supply line by teeing it in. The supply lines is .5 inch copper pipe as is the added line and fittings. The water source is a well. The water pressure seems to have dropped a lot even when using only one faucet at a time. The added line is...
Supply line won't stop running. Main water supply off
[ 3 Answers ]
I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...
Sort of a Plumbing Question - Disenfecting PVC Line ?
[ 3 Answers ]
Okay - we got water run to the house we are building - had to run a line about 500 yards from the old house to the new. The well is about 3/4 mile from the old house and thus about a mile from the new one. The guy put in a 1 1/4" PVC pipe and actually used 12' segments glued together. That was... View more questions Search
|