Ask Experts Questions for FREE Help !
Ask
    donaldwflack's Avatar
    donaldwflack Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 3, 2007, 09:50 AM
    Trane heat&air thermostat replacement
    I am replacing the thermostat to a trane heat&air home unit and I need to know what the different colrs of wiring relate to on a replacement thermostat brand name hunter bought from Lowe's home improvement store. Thank you for assistance.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Apr 3, 2007, 11:29 PM
    Look at the sticky notes at the beginning of the forum. There is info there for thermostats.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat & Air Conditioning [ 1 Answers ]

I live in SW Missouri. We are currently experiencing an ice storm. When my power came back on after being off about 3 hrs. my heat pump is completely iced up causing the unit to shut down. Can I pour warm or hot water over the unit to remove the ice? I believe it simply is unable to get air...

Programmable Thermostat, Fan runs, Heat/Air do not run in Auto setting [ 10 Answers ]

I am installing a Honeywell, RTH230B. My connections are: R to Rh (red jumper to Rc that came with the unit) W to W Y to Y G to G B to nothing The fan comes on (when set to "on").

Trane Heat Pump tstat replacement with Honeywell prog - wiring question [ 1 Answers ]

I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -...

Replacement motor for Trane air handler [ 1 Answers ]

The motor in one of my 35-year old Trane air handlers recently Blew. It looked quite old. I figured it would be easy to replace It just by matching the specs. Unfortunately the new Motor runs for 10-15 minutes, then it stops for 15 minutes, Then it starts again. I suspect the thermal...

Installing Central Heat & Air [ 2 Answers ]

I have a 100 year old, two story ranch house, with NO insulation. Currently all that warms the house is one wall heater and one (seperate) A/C. I want to install a central heat and air unit. My question is: Do I need to install the central Heat and Air PRIOR to putting in insulation? Or can...

View more questions Search