Ask Experts Questions for FREE Help !
Ask
    thepappaw's Avatar
    thepappaw Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 13, 2014, 08:57 AM
    Troubleshooting Maytag Neptune Dryer
    I have Maytag MCE8000AYW Neptune Dryer. The top part of this unit works fine all the time even when the bottom is not working properly. The bottom part of dryer works for about 15 or 20 minutes then just stops and after sitting for a few minutes comes back on all by itself and works again for 4 or 5 minutes then shuts down again and will not come back on by itself again. Then I open the door and let it cool off for a while and then close the door and it again works fine for a while then quits again. After going through this several times, the dryer then for some reason will work properly through a complete cycle like everything is OK. I cleaned out the machine vents and ordered and replaced the Thermistor #31001515490 and it does the same thing. This started a while back and the vent hose was almost completely blocked and I actually replaced it and thoroughly cleaned out the bottom part of this machine, but that did not correct the problem. Help please I don't know what to do next.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Mar 13, 2014, 10:32 PM
    Sounds like it is still dirty. If you miss one little thing it still will not work. Clean it well by taking it totally apart and washing out the parts.
    thepappaw's Avatar
    thepappaw Posts: 2, Reputation: 1
    New Member
     
    #3

    Mar 14, 2014, 06:18 AM
    OK, I will try that. Again and see what happens.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag neptune dryer, MDG6700aww, barely heating. Dryer is only a few months old. [ 6 Answers ]

Maytag neptune, MDG6700aww, is barely even getting luke warm when drying clothes. I have tried changing the temperature and cycle settings and it doesn't make a difference. When I first put the dryer in it worked fine, now in the past month its not even getting "warm". It's a gas dryer.

Maytag neptune dryer [ 3 Answers ]

My dryer won't spin and I smells like something is burning when I hold the button to try to start it This is a gas model mdg3000aww Is it the bearings? How do I take it apart to see the problem? From the front??


View more questions Search