Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Three wire feed into a flluorescent light with only a two wire ballast
[ 1 Answers ]
I'm hooking up a new 8ft fluorescent light fixture to replace the old 12ft fixture. The feed BX wire feed has a 3 wire as it in series with wall receptacles, but operates off one switch. How should I tie in the red wire
What size wire should feed a dinning room?
[ 4 Answers ]
What size wire should feed a dinning room?
200 AMP Electrical Service Feed Wire Size/Type
[ 1 Answers ]
Good Morning, I live in the Chula Vista, CA area. (San Diego). I built a granny flat. I have a 400AMP underground service from the street to a 2 meter base on my existing home. 200 AMPS for the front house on one meter, and 200 AMPS for the rear house on another meter. There are two, 200AMP...
Bathroom wire size
[ 2 Answers ]
I know that a 20 amp breaker and a GFCI plug are required in a bathroom. Does this mean the wire size has to be 12 gauge or can it be 14? If I wire the bathroom lights on the same circuit, can I splice in and use 14 gauge for the lights on a 12 gauge feed?
Bathroom chandelier and Bedrooms
[ 2 Answers ]
Hello I want to install a chandelier above a bathtub. What is the minimum height do I need above the bottom of the tub? Also can more than one bedroom be on 1 acr fault breaker. And is it better to have the receptacles and lights on separtate arc faults? Do smoke detectors need to be on... View more questions Search
|