 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Squealing Liftmaster garage door opener
I have a Liftmaster chain driven garage door opener. It was making a loud squealing noise and I replaced the sprocket gear. It worked great for two weeks and is now beginning to squeal again, but only when the door is closing. The door seems balanced-stays up when released-closes evenly-chain is about 1/2 inch above T-bar.
Appreciate any help |
||||
|
|
Check out some similar questions!
HP I have a radio controlled entrance light on a detached garage which works well. However I have now discovered that the entrance light also goes on when the garage door opener is actuated. Since I usually use the wall switch to close the garage door it leaves the entrance light on at...
Hello. The wall opener works perfect but both remotes stopped working. Replaced batteries. I tried reprogramming remotes based on manual but they still don't work. The garage door opener light is supposed to blink twice or two clicks but neither action occurs so they are not programmed. If I...
The garage door opener responds when prompted to close. However, after closing fulling, it immediately goes into the open cycle and goes back up. There are no physical obstructions in the track.
My garage door won't respond to opening and closing a lot of the time, have to sit and click over and over. Have replaced all batteries in all remotes, it happens with all of them.
I mistakenly gave someone my garage door opener that didn't return it. I had a male friend come over and "change the code" including my car opener and gave me a universial which he also programmed. I came to realize my code for my keyless pad outside doesn't work (since he changed the code... )....
View more questions Search
| Question Tools | Search this Question |
|
