 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Problem with the pressure
I have just moved into a small flat that has an Alpha CD25C boiler, on all the paperwork that I can find, all say that the needle in the pressure gauge should be in the green area, the paperwork also says that if it is below this area, to release the pressure, how do I do that?
|
||||
Check out some similar questions!
I recently had a thermal expansion tank installed and ever since then I have noticed that when I run water in one part of the house a toilet will run in another part of the house, in other words I get a chain reaction. This did not happen prior to installation of tank. I called the plumber that put...
Here's the problem: in the last 2 weeks or so, our water pressure on the hot side has significantly decreased and the cold water is just slightly less. When I turn on a sink faucet, the pressure is fine for about 5 seconds then decreases noticeably, especially on the hot side. The shower pressure...
Unit's been on the fritz for awhile now. I had an HVAC guy out multiple times for the same problem but always a different result. They replaced the ignitor module, ignitor and control board and it still runs intermittently. Monday I grabbed the harness and gave it a tug an noticed a clicking...
We recently moved into a 7 year old house that is on a well. This week we installed a new diswasher and in the process we shut off the hot water by turning the shower valve coming directly out of the hotwater heater. When we turned the valve back on a lot of black/brown gunk flowed out of the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
