Check out some similar questions!
Can I replace 12x8 cold air return duct with 12 inch flex duct in my basement?
[ 2 Answers ]
I need head room in my basement and want to take down the old cold air return metal duct work 12x 8 and re-route to the plenum with 12"flex duct. Will this be a problem with the furnace working properly? Please advise
I have SS duct (HVAC) to be connected to a Galvanized steel duct. Do I need dielectri
[ 1 Answers ]
Do I require dielectric washers to join the SS duct to Galvanized steel duct in HVAC duct network?
Adding/sizing an AC duct
[ 2 Answers ]
I am remodeling an upstairs bathroom which has never had an air conditioning duct. The easiest way in my mind would be to tap off the current duct in the adjacent bedroom and install a new ceiling vent (the heat is baseboard hot water). My concern is that the current bedroom duct seems to be sized...
Duct sizing
[ 1 Answers ]
I have a heating duct running from the basement to the 2nd floor through a kitchen wall. We have since knocked down the kitchen wall and we need to reroute the duct. The original duct is rectangular 3" x 10". We now need to run the new duct along the basement ceiling and up the outside of an...
Duct sizing
[ 1 Answers ]
Am looking for a software for sizing and designing ducts can you help me View more questions Search
Add your answer here.
|