 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Shower mixer dripping form Hp Lp screw
My concealed shower mixer has a small screw, next to it the letters HP and LP... there is a small constant drip coming from it. If I tighten the screw it gets worse, if I loosen it (antilock) it stops. Should I just loosen it more?
|
||||
Check out some similar questions!
I have a Glacier Bay single handle shower mixer. The wife is complaining about the lack of hot water. I have attempted to adjust the temp using the incoming valves to increase the hot and decrease the cold water incoming. This seems to have little affect on the temp. Is there another internal...
Hope this one is easy. The shower mixer valve broke off in my wife's hand. The home is about 14 years old. Should it be easy to replace? Anything tricky about it? It appears that you can simply unscrew it for a replacement. Thanks
How do I remove the center stem of asyco shower mixer
Just replaced the head on a fixed head shower,put the new head on and turned the shower on,nothing coming out of shower,floor covered in water,where have I gone wrong?:confused:
Iam Installing A Mixer Shower - Which Is Not Thermostatically Controlled - I Have Installed The Cold Supply To The Rising Main But The Pressure Is Too Great And The Connection Is Leaking A Bit - Can I Reduce The Pressure By Means Of A Valve. Also I Have Just Been Told That It Is Illegal To...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
