Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Weil Mclain 18yr old furnace - 1 "failed" zone of a 4 zone forced hot water system
[ 0 Answers ]
I just bought a house that was built in 1993 and has a gas fired Weil Mclain furnace, forced hot water, with 4 zones - each with a Taco Zone Valve. The system also has one circulator pump. In late fall, I ran the system and all zones worked fine. When winter came and system was on 'full time', it...
Oil Burner/Hot water Baseboard system.
[ 0 Answers ]
Water pressure has a "red line" at 50lbs on the 2" OB pressure gauge. Lately pressure is down to almost zero after several days. There is a regulating value at the water supply line with a manual override to fill/increase the pressure. What is the normal pressure for this type of system? Is the...
Forced hot water system
[ 2 Answers ]
My wife and I are just moving into a big old house. It has cast iron radiators on the 1st and 2nd floor which I have already filled and bled. My question is, should I have lit the furnace/boiler (which looks very old) before I filled the radiators. Secondly, I have found the pilot knob, but...
Beckett oil burner-forced hot air
[ 1 Answers ]
My furnace doesn't start up when the temperature drops. It restarts when Iuse the reset button. What do you think the problem is?
Thermostat replacement dual zone gas hot water system
[ 5 Answers ]
Hi all, first question here! I've spent an hour searching, learned a lot, but not a specific answer so I hope this isn't too common a question! One family ranch home with gas furnace, hot water baseboards, 40 year old Honeywell thermostats in main floor hall and basement main room. When... View more questions Search
|