 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Connecting piezoelectric crystals in series
I'm sorry, I don't have much experience with piezoelectricity and could really use your help.
I have with me piezoelectric quartz, ceramics. They are gold on the top and bottom and clear (crystal like) in between. Can someone provide a step by step on how to configure them in series? I know how to connect thins in series, but in this case where would I connect the wires to on the ceramic? A link that shows something similar is provided. Thank you http://bit.ly/1edVC69 |
||||
Check out some similar questions!
Hello! We're in 8th grade and our doing a project. Our goal is to put piezoelectric plates inside a pillow and harvest the energy from the pressure of the head on the plate during the night and use it to charge a phone. However, from this point we are a little confused. We've been doing a lot of...
What are the electrical components required, to store the electricity generated across a piezoelectric material, apart from a capacitor or battery?
How would you relate the force which you bang the piezoelectric plate with the voltage produced by it.. Is there any formula.
I have a mfg. home with a Coleman propane furnace that uses a White Rogers 36C67 type 189, 24 volt 60HZ gas valve. Is there a piezoelectric pilot kit to update from my old standing pilot which blows our frequently? I got a lot of help from this forum and category a couple years ago. Thanks.
Remodeling basement. Trying to figure out how to get 1 dimmer switch to control 4 lights in a series. Tried and can't get it to work. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
