 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low voltage code on furnace after changing humidifier. How do I reset?
Hi. I changed out my furnace humidifier and everything was working great until I started to remove the old humidistat. My furnace shut down and I now have a low voltage circuit short indicator. My furnace is a Carrier Weathermaker 8000. Does anyone know how I can reset it so that I can get my furnace up and running?
|
||||
Check out some similar questions!
Want to change 110v thermostat to low voltage programmable. Is it possible and how.
The transformer have 29vac on one leg there is a test plug down by the controller and I have 110vac on it but no low voltage
Hi. I am renovating the kitchen and plan to install small halogen MR16 ceiling pot lights. Contrast and Lightolier have been recommended. At least, the Contrast line is available with either line or low voltage feeds. These questions come up as the plan calls for 9x35w MR16 (ceiling pot...
My humidifier does not come on when the blow motor kicks in Instead the humidistat energizes the cellenoid and it stays on. Should not the blower motor turn the cellenoid on?
Hi! I just installed a section of track light in my living room just to see what it would look like and so far I'm not convinced... you see, I had a regular celing lamp with a 75w incandescent bulb and the room was very well lit... now with the track light I find that I need 3 fixtures with halogen...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
