Ask Experts Questions for FREE Help !
Ask
    onarock's Avatar
    onarock Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 22, 2014, 01:25 PM
    Throat sizes of toilets
    What is the maximum size of a toilet throat?

    We need a toilet that has great flushing abilities.

    K
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Feb 22, 2014, 02:00 PM
    Hi Onarock

    If you want a GREAT flushing toilet then you may want to consider purchasing a PRESSURE-ASSIST toilet...see video below:



    Kohler, Toto, American Standard and many other manufacturers make these toilets. They are expensive compared to your average run of the mill toilet, but these flush great!!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have two toilets in my house. Recently both toilets have stopped fininshing flush [ 1 Answers ]

I have two toilets in my house and recently both have stopped flushing completely. Flush starts fine, but at end of flush toilets power seems to stall out. This system is on city sewer service, and until past week or so both toilets were fine. Now I am forced to flush toilets up to three times to...

Tire sizes [ 1 Answers ]

I have a '99 Pontiac Grand Prix with P225 60r16 tires, I have a set of P235 60r16 tires that were given to me by my Dad. I understand the speed will be different (60mph would be 61.1 with the bigger tires) but can anyone tell me if these will fit on my vehicle or will I have clearance problems? ...

Insulation Sizes [ 7 Answers ]

I am going to hang new drywall in my kitchen. One of the walls is on the perimeter of the house so I figured I should re-insulate as well. I was recommended to get at least R-18 insulation given where I live. I'm looking at wall insulation sizes and I keep seeing 15 inches wide, but if studs are...

Engine sizes [ 1 Answers ]

What is the cubic inches for a dodge 5.9L

Drain pipe sizes and venting sizes [ 4 Answers ]

1.) What dia. Drain pipe is used for the shower/tub? 2" ? Is that ID or OD? 2.) What dia vent pipe is for the shower/tub? 2"? 3.) I'm going to put a vent in for the shower/tub in my basement. It starts at the slab then goes straight up about 7ft. And then does a 90 and then is running...

View more questions Search