 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low water pressure in shower, no shower head
Shower was fine, not used for several months now no volume. Removed and replaced (same) valve stem assembly. Removed shower head, same problem, put water pressure gauge on shower head arm and it reads 43 psi, hot and cold. What can be the problem? It has been driving me nuts, thanks. ( in N.C. 50+ yrs old, can do most plumbing)
|
||||
Check out some similar questions!
I am having problems similar to what the following link describes I have a Moen shower handle and the cartridge has been changed recently. Type 1225 without any change in shower pressure. https://www.askmehelpdesk.com/plumbing/low-hot-water-pressure-shower-177341.html Can someone explain...
I have a new shower head, and only get a low pressure cold water to come out. It is a Tuscany shower head/ faucet. I called the company's phone line, and they had me a) remove the rotational limit stop, and b) turn the hot & cold water valves which are on both sides of the ceramic cartridge...
Hi - We have low hot water pressure from both our shower head and tub faucet It's a Delta single arm ball handle if that helps. Any suggestions would be appreciated.
I had good water pressure but it has become less and less,so I removed the valves in the cold and hot handles figuring there was debris to be flushed out. When I turned water on with valves out the stream hit the back of the tub (about 5 feet). I flushed them out for a few minutes (rusty water,...
What is causing low water pressure at master shower faucet or shower head what can be done to correct
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
