Ask Experts Questions for FREE Help !
Ask
    bluemoney's Avatar
    bluemoney Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 14, 2014, 02:04 PM
    Noma thermostat-RTH2300B1004-how to set F'/C' And no weekly time-adjust manually each
    Not my house-Need to set the thermostat.. NOMA RTH2300B1004/052-8826-4
    It was on farenheight now it's on Celsius... no manual.I pushed both arrow keys and got a big 1 and a small 1 on the menu.. it went up to 5 if I kept holding it.. I was trying to set the current time which I did OK but then it kept changing days and times to program daily set up.. I just want manual set temp and time for now no daily off-on stuff... Thanks very much... SMILE...
    edward3's Avatar
    edward3 Posts: 12, Reputation: 1
    New Member
     
    #2

    Feb 15, 2014, 08:26 AM
    Only thing I can tell you , is to get on line type in info of the thermostat, name, model number . Try to pull up , install instructions .

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to set the time on a maple chase thermostat [ 1 Answers ]

Hi I I have a maple chase thermostat. I need to know how to set the time . At the moment I have it set at 75 F .but when the temp reaches this number the unit does not shut off and the temp keeps dropping can you help me?

Heat, but only when I manually touch thermostat [ 1 Answers ]

I have gas heat and a very old thermostat. My thermostat has a round dial and I set the top for the desired temperature; the bottom supposedly represents the temperature of the house. When I make the top number higher than the lower number, the heat comes up perfectly and stops coming up when the...

Running Fan Manually from Thermostat [ 1 Answers ]

I have an Intertherm model MMHB-070ABHR gas furnace. I am replacing the old mechanical thermostat which did not have a fan on switch with a digital thermostat. The wiring to the thermostat now has only 2 wires. Which wire on the furnace do I wire to so that I can use the fan control on the...


View more questions Search