Carrier furnace 3 amp fuse blown

martincello Posts: 2, Reputation: 1

New Member

Feb 12, 2014, 09:54 AM

Carrier furnace 3 amp fuse blown

Is a fuse for a furnace the same as an automobile?

martincello Posts: 2, Reputation: 1

New Member

Feb 12, 2014, 10:00 AM

Carrier furnace code 24

Carrier furnace Flash code 24

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Feb 12, 2014, 10:30 AM

Yes. Codes are typically found on the inside of the air handler door.

Add your answer here.

Check out some similar questions!

Bryant Furnace Secondary Voltage/Blown 3 amp fuse. [ 30 Answers ]

Hi all! I've been reading the posts regarding fuses blowing in the secondary voltage circuits on Bryant furnace/blowers. I blew the 3 amp fuse in this circuit two weeks ago on my gas Bryant furnace. Repairman diagnosed the problem using the flashing led light (2 fast, 4 slow). He replaced the...

My 3 amp fuse blows on my Carrier furnace due to Com terminal [ 0 Answers ]

Hello, I have a Carrier furnace that is suddenly blowing the 3 amp fuse. I finally isolated that the COM terminal is blowing the fuse. If I connect the blue t-stat wire to it, the fuse will blow. I did try replacing the t-stat already. I already had the a/c wires disconntected also. Is this a...

Blown fuse on furnace [ 0 Answers ]

I turned my air on and I blew the 3 amp fuse on the bored in the furnace. When I replace the fuse I can't get anything to work now. I get a steady red light. I totally unhooked the AC unit from the furnace until I can get the furnace to work properly any more. When turn the heat on I get...

Carrier furnace blows 3 amp fuse after burner and blower fan have been on For a while [ 0 Answers ]

Carrier furnace with 4 LED control board 3 amp fuse opens after burner and circulation fan has been on for awhile 26Vac pulls down to 8 volts ac Replaced with 5 amp fuse and it does not open and furnace operation seams normal. Valve control is a White Rodgers 36E What should the resistance of...

3 amp fuse blown [ 2 Answers ]

I have a Carrier Gas Furnace that is blowing the 3 amp fuse for the secondary 24 Vac. I have replaced the fuse and after the heat is on for awhile the fuse will blow and then I have cool air blowing. Please advise on how to troubleshoot problem.Thanks