Ask Experts Questions for FREE Help !
Ask
    JohnnyGr's Avatar
    JohnnyGr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2014, 02:21 PM
    Plastic faucet base plate
    I want to put putty between the plastic base plate of a kitchen faucet and the stainless steel sink. Even though I know that none is needed I want to prevent any leakage between the fixture and sink. I bought a product called Oatey Plumbers Putty, but after reading the instructions on the container I found that it shouldn't be used on plastic. Is there any safe putty to use on the base plate?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Feb 9, 2014, 02:38 PM
    Think I would use a little clear Kitchen and Bath caulk.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Feb 9, 2014, 03:00 PM
    I think the issue is staining the plastic. Under the faucet, on such a small area should not be a problem. However, if you will worry, take Harold's advice.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Feb 9, 2014, 03:02 PM
    I believe that plat is nylon and not actually plastic.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A spray-like leak on plastic tube water line to Freezer right near the base. [ 1 Answers ]

It is a slight spray right before the tube goes into the frezzer door base. I do not think I have any room to cut it out so is there any type of tape or liquid compound that could repair it? Not sure how to get the hose out of the door. This unit is about 6-8 years old. It is a GE side by side...

How to replace a rotten base plate [ 3 Answers ]

I recently purchased (3 days ago) a new home (10 years old) but new to me. Yesterday we began the demo of the kitchen and to our surprise found rotten wood under the tile below the refrigerator. Looking more carfully I noticed staining traveling along the wall and going behine the cabinets. After...

Cracked plastic shower base? [ 1 Answers ]

Hi all, we built a couple of units two years ago and the plastic shower base in one of the ensuites has cracked. I am wondering what may have caused this and if there are any fixes besides replacing the whole shower base. Is it possible to have dodgey bases? This is the second one to go. Thanks...

View more questions Search