Ask Experts Questions for FREE Help !
Ask
    lily_lou25's Avatar
    lily_lou25 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2014, 08:48 PM
    Relay switches or heating element
    On my heater the fan will turn on but no heat will come out, when I turn the unit off my heating coils light up, so I am stumped on what it could be
    Mr Sixth Fix's Avatar
    Mr Sixth Fix Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Jan 29, 2014, 10:21 PM
    Sounds like the heat element has sagged to the point that it is touching it's grounded metal cage. To shorted to provide heat with the fan blowing across it. Very dangerous .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer not heating. Thermostats and heating element OK.what else to check? [ 5 Answers ]

I had a heating problem. Replaced broken coil. Checked all thermostats.everything has continuity. All was working fine. But today dryer stopped heating again. All still check OK for continuity. What else to check?

Ford contour relay switches [ 1 Answers ]

Where is the turn signal relay switch for a 96 ford contour

Heating element [ 1 Answers ]

Where do I buy an heating elementfor my 90 series kenmore dryer

View more questions Search