 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello. We had our well freeze during this cold weather. We did have to replace the filter as it froze and busted and since then the gauge has read 100 psi. We replaced a couple of the pipes also and one still has a small leak that we have to replace again. The new filter is actually bigger than...
well pump will not go over 40 psi. I changed out point and pipe?
We have a 3/4 HP jetpump and a 19 gallon pressure tank hooked up to a 2500 gallon watertank and then going into our little house for about 8 years now. We replaced the pump about 4 years ago and the tank didn`t hold pressure anymore after 8 years, so we bought a new one. Now... we repositioned the...
I replaced my well pump a week ago because it wasn't getting over 30psi. I replaced with a Flotec from Home Depot set at 30-50psi. It worked fine for a week until yesterday morning. After the morning showers it kept running and wouldn't get over 40psi. This problem persists every time I turn the...
I have a new house. We put in the well first and had the well guy put in two outdoor faucets (the kind you get at farm supply places - that have drains at the bottom to prevent freezing - the spigot is a lever). The first one is near the well. The second one is up a steep hill at the barn. So...
View more questions Search
|
