Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My water pump will not shut off, replaced the pressure gage, made sure there were no
[ 2 Answers ]
Water pump will not shut off, replaced pressure gauge, made sure there mwere no leaks. Could the jet pump be pushing water back down the pipe into the well? The pump has two pipes going into the well , could the foot vavle be leaking? But the water is always there so I don't have to prime it. ...
Water Pump Pressure Switch
[ 14 Answers ]
I own a large acre property and am having some plumbing issues. I’ll try and explain this best I can. The Old System: Water was pumped out of the well, through a pressure tank, a holding tank, and then a couple hundred feet up a hill to a 5000 gallon metal tank. From here the water was...
Replaced a hot water tank,water is not going to the pressure tank-the pump stays on
[ 2 Answers ]
Replaced a hot water tank, turned the pump on and the water is bypassing the pressure tank. The pressure tank will not fill up and the pump remains on and will not shut off. We do get water though but needs to shut off the pump so it will not burn out. Any thoughts? Thank you Any ideas will...
Just replaced switch on deep well pump worked for awhile but now I have no water
[ 2 Answers ]
Not sure how old pump is but this would be the 2nd time I replaced the switch on this pump after losing power and water to it . At first it did work for awhile but dept clicking clickin clickin. Water pressure wasn't very good anyway. Not much money frustrated.
Water Pump Pressure Switch
[ 9 Answers ]
I have a "jet pump" for our grey water cistern. I have problems with the pressure switch. It has a "Square D" pressure switch on it. When I manually tun the switch on "things work" but when I rely on it working automatically, sometimes it does and more often it doesn't. Especially if it is left... View more questions Search
|