 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Two ceiling florecsent out, 7 cans in. How to wire?
I want to remove 2 ceiling mounted fluorescent 4 tube fixtures, controlled from two wall switches, wired together. I want to replace with 7 ceiling 6" can LED lights, wired together and operated from both light switchs. I have dry wall, insulation will be in contact, and I would like to use 2 dimmers in place of switches.
I do have access to the space above, although it is towards the outside or slope of the roof, over the kitchen. |
||||
Check out some similar questions!
My husband was trying to install a ceiling fan this weekend to replace an old one that was there previously. From the ceiling, we have a black wire, a white wire, and a blue wire. However, in the instructions for the fan, it says that in the ceiling we should have a black wire (ungrounded), a...
Hi, All! I'm wondering if it's okay to store unfinished cans of food in the refrigerator in their original cans. I've heard that it wasn't okay, and that some sort of chemical reaction happens between the sides of the can and the food to make the food unsafe, once the contents has been...
:confused: Need help my chain broke no light in kitchen no fan working:) :)
I have bought a FAN/LIGHT dimmer switch in lieu of the regular switch with the pull chains on my fan/light combo. I haven't even started with the switch portion where I have red wires and one thick black one. I am still working on the damn pull chain to NON pull chain setup now. I have this same...
I'm planning on installing 2 ceiling fan, 1 in each of 2 bedrooms. There's no electrical on the ceilings and need to come down from the attic. The attic has several different white plastic contained wires running throughout the attic. I'm wondering if I should splice from 2 separate sources, or...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
