 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Do you have full cold water flow? If you do not. Remove aerator and clean or replace.
If you have have full flow cold water but do not have full hot, you have a blockage in the hot side. Turn off hot water stop valve. Remove hot handle and stem. Place cloth over hot port and turn on hot water stop valve briefly to flush. If that does not fix the problem, the blockage is in the hot water stop valve and it will have to be replaced. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello ,I live in a 2nd floor apt in a 2 family home my kitchen faucet is my problem the cold water is fine but when I turn on the hot water faucet the water will start to flow then it turns off I heard a noise from the pipe just as it turns off?? Why does this hot water just not stay on it does...
Hi! We have an NTI on demand hot water system. Since it was installed we have (on and off) heard a *humming* sound coming form the pipes when the hot water is shut off. We have had the system bled to see if it was air. No change. We have have the combustion chamber cleaned and the system checked,...
I have the hot water on in the kitchen sink and it will just turn off. When I go back later it might go on again and then will turn off.
I have an electric hot water tank that is in good working order (it has been checked out professionally) The problem is that when any of the hot water taps are turned on in the house, we get instant hot water but after about 20 seconds turns to lukewarm. It feels like cold water is mixing in with...
Cold water runs out and when it gets hot it turns off; I then turn the hot water valve off and open it again along with the cold water valve. If the mix is to hot it turns off again.
View more questions Search
|
