Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower door roller hardware
[ 5 Answers ]
What's the best way to attach roller & slider brackets to my glass shower doors. I've tried some epoxy, but they come off. I'm missing a couple of the brackets and I'm having a hard time finding replacements. Any suggestions?
Radiator has clogged 3 brand new valves. Help!
[ 2 Answers ]
Valve #1 - The plumber installed a brand new varivalve valve on the radiator in my son's room. It worked for about a week, and then there was no heat coming up. Valve #2 - The plumber returned and replaced the clogged valve with another brand new varivalve. Same thing happened after about a week....
Problem with water shot off valves for bathroom fauset
[ 1 Answers ]
I need to shot off the water supply to bathroom faucet, but I believe they are frosen or corrosion is cuasing the problem. I cannot turn the shot off valves at all
Which product to use for caulking shower hardware?
[ 3 Answers ]
We have a two story home and the kitchen is below the master shower/tub. There is no caulk between the hardware and tile wall in our shower. When we take a shower it starts leaking through the ceiling down to the kitchen. I'd like to know which of the following two products is best to use to caulk...
Removing shut off valves under bathroom sink.
[ 3 Answers ]
I had a problem after I insstalled a new sink faucet. I had a small drip coming from the cold water shut off valve below the sink. No matter how I tightened or loosened it, the screw in front and the knob itself, it would still drip slowly. So I figuered I would just replace the valve. I bought a... View more questions Search
|