Ask Experts Questions for FREE Help !
Ask
    sim one's Avatar
    sim one Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2014, 04:05 PM
    Gibson furnace manual
    Blower fan will not kick on... code on board is pressure switch is open with inducer on
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 10, 2014, 05:56 PM
    The inducer fan closes the pressure switch. Make sure the small tube on the switch is open and that the orifice is open too. Check voltage across the switch. Should be 0 with no inducer and 24 when inducer is running.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gibson furnace [ 1 Answers ]

It is giving me a limit circuit open code... the blower is the only thing running and it doesn't shut off unless I turn off the main electrical switch... anyone has an idea?

Gibson furnace [ 0 Answers ]

Furnace green light blinks continuously and motor kicks in like it is going to start but then shuts off

Gibson furnace manual [ 1 Answers ]

Hi mu furnace for my AC goes on but I have no air coming out of the vents I also have a steady red light on the mother board .

Gibson furnace? [ 0 Answers ]

The fan on our gibson furnace will not shut off. We replaced the thermostat which didn't help. Any suggestions?

Gibson Furnace [ 9 Answers ]

Gibson Furnace will blow cold air sometimes instead of warm air. I believe it to be a problem with a wire because we had it worked on before. There are also two lights - one stays on continuously and the other one will blink. Is this something I can repair myself? If so, how? The furnace is...

View more questions Search